The maintenance of the mould of no burning brick machine

All parts of the machine have their own rated power and voltage. They can’t work overload. If they work normally, the service life of the machine will be shortened and the parts will be damaged. We all hope that our non burning brick machine can be durable and obtain more wealth for ourselves. So we need to understand and be familiar with our products. The following is to explain the maintenance of the non fired brick machine, so as to help extend the service life of the non fired brick machine mold.

Maintenance of full automatic cement burning free brick machine:

1. If the oil cylinder leaks, replace the corresponding type of seal.

2. All parts of the machine have their own rated power and voltage. They can’t work overload. If they work normally, the service life of the machine will be shortened and the parts will be damaged.

3. It is a simple and direct method to read the instructions of no burning brick machine. It is strictly in accordance with the standard operation to extend its service life.

4. The normal operation voltage of cement brick machine is 380V. Correct installation and grounding ensure the safety of operators.

5. The damage of the pressure spring causes the pressure regulating valve to lose its effect, and the pressure spring of the same type shall be replaced in time.

6. No burning brick machine mold brick surface loose, crack Because the pressure of the upper head is too low; (the upper head pressure is too low to position the brick, which leads to the loose brick surface. The pressure of the independent pressure regulating valve corresponding to the upper oil pipe of the upper head oil cylinder should be gradually increased. While lifting the lower die, gently move the wrench of the upper die, so that the upper head oil cylinder maintains a certain pressure, which can keep the brick in the lower die from rising with the die, so as to reduce the damage of the brick Rate).