Do you know what are the technical requirements of automatic non burning brick machine

Some people who have no working experience and no operation ability will inevitably have problems when using the automatic non burning brick machine technology, and even bring serious safety concerns to other staff. Therefore, we also need to have a detailed understanding of the technical requirements of automatic brick making equipment. Safe use of equipment is the basis of the premise, on the basis of safe use of the corresponding equipment brick technology play, naturally more practical significance. Of course, it can also bring higher profits to some manufacturers. Then, the relevant details of technical safety requirements are summarized as follows.

Take the post with certificate and do not leave midway.

For some personnel who need to contact with automatic color and brick machine, they need to hold the corresponding work certificate, have rich work experience, and can take emergency measures, and have good adaptability. Of course, for those who do not have the certificate, they need to be strictly prohibited, and these personnel are strictly forbidden to leave during the operation of machinery and equipment, because Their midway leave may lead to some mechanical equipment failure problems, but it is difficult to achieve timely and effective treatment, resulting in serious property losses and casualties, so we need to meet these basic technical safety requirements.

Maintenance of machinery and equipment, fixed equipment is the most important.

As we all know, when using the automatic non burning brick machine technology, we need to remember its safety rules. In particular, the weekly technical maintenance is to check and check the possible problems of the equipment, avoid equipment problems, seriously affect the speed and quality of brick making, and also expect to achieve better use, so in the maintenance When machinery and equipment, we also need to follow the corresponding safety requirements. For example, we need to fix the hopper before maintenance, because the hopper has a certain position from the ground. If the material is not stable enough, it may cause accidental falling. Once there are people below, it will cause serious casualties. Of course, after fixing the hopper, you need to cut off the power supply, because if If the power supply is not cut off, it is likely that some wires or equipment with leakage phenomenon will bring safety concerns to maintenance personnel, so the relevant technical safety requirements during maintenance are also worthy of our attention.

Preliminary inspection of mechanical equipment.

Since the technology of automatic non burning brick machine belongs to large-scale mechanical equipment, its operation naturally needs to consume electric energy and consumes more manpower and material resources. Therefore, when you start the machinery and equipment, for the sake of safety, you need to carry out the preliminary inspection. Because the price of this kind of mechanical equipment is relatively expensive and the investment is large, so the preliminary inspection and regular maintenance can improve the service life of the equipment and prevent the equipment from being worn out and excessively high. Of course, we need to invest more money. When checking, we need to check whether its clutch operates normally, whether its brake is normal, and whether its hopper and other corresponding sliding device bearings are in good condition. If parts are seriously worn, we need to find professionals to replace them. If there is a lot of noise or irregular operation, we also need to mention it High vigilance. Of course, we need to cut off the power supply first, and then we need to check whether the bolts and screws of the hopper are tight. Of course, through this series of investigation and detailed inspection, we can realize the safe operation of the machinery and greatly improve the efficiency.

At present, there are many kinds of brick making machinery and equipment on the market, but their regular maintenance as a large-scale mechanical equipment is the key to extend its service life and also an important factor to save money. Therefore, we need to train professional personnel to carry out the corresponding inspection and maintenance, once there is a small fault problem, it can not be ignored to quickly remove.